Services · Production processes
Assembly and testing
Assembly and full testing of hydraulic cylinders and machine assemblies. Nothing leaves here on the assumption that it works.
Production processes
Assembly and testing of machines, assemblies and industrial equipment. Pressure and function testing with documentation, before anything leaves the workshop.
Our specialisations
Careful assembly
Assembly by people who have taken the same units apart, which is what tells you how they fail.
Pressure testing
Strength and tightness testing, at the pressure the unit will actually see in service.
Documentation
Full technical documentation and test records handed over with the unit.
Warranty
A warranty on what we assembled and tested.
The last stage, and the one that decides
Assembly and testing is the final step in building a cylinder or an assembly, and it is the step where everything earlier either proves out or does not. Once machining, blasting and painting are done, the components come to the assembly bench and are built up to the design.
The part of assembly that decides service life is the seals: selecting them and fitting them without damage. We use seals from established manufacturers, fit every fastener to its specified torque, and hold the tolerances rather than working to feel. A seal nicked on a sharp edge during assembly will leak in a month, and it will look like a manufacturing fault rather than an assembly one.
Testing against what it will actually see
A test at a convenient pressure proves very little. We test at the pressure and under the conditions the unit will meet in service, and for cylinders that means a tightness test above nominal working pressure, a check on smooth travel over the full stroke, and — where safety valves are fitted — verification that they open and reseat at their setting.
For machine assemblies it means function testing: the sequence, the interlocks and the end positions, run enough times to show up what a single cycle would hide.
The results are written down. A unit leaves here with a record of what was tested and what the readings were, not with an assurance.
Assemblies, not only cylinders
Besides cylinders, we assemble and test machine sub-assemblies, conveyors, dosing systems and driven structures — frequently ones we also designed and machined.
Having design, manufacture and assembly in one place matters most when something does not fit. There is no argument about whose dimension was wrong; it gets corrected and the job moves on.
Related services
3D design and FEA
We design machines, dies, welding and soldering tooling and spare parts. FEA calculations and fatigue assessme…
3D scanning of parts and machines
We scan parts with no documentation, machines for installation design, and components to be reproduced. A scan…
Sandblasting and wet painting
Sandblasting and wet painting of steel structures, machine parts and assemblies. Thorough surface preparation …
Sending parts to us from abroad
We are based near Wrocław in south-west Poland, inside the EU. Parts arrive here by courier or pallet freight from across Poland and from EU countries — there is no customs clearance on shipments sent within the EU, so a pallet from Germany or Czechia moves the same way a domestic one does.
1
Send photos first, not the part
A photo of the nameplate, a photo of the whole unit and a line about what it does wrong. We will tell you whether it is worth reconditioning before you pay for freight.
2
Drain the oil
Hydraulic units must be drained before dispatch — couriers refuse them otherwise, and a leaking pallet is usually rejected on arrival.
3
Pallet, not a parcel
Anything above roughly 30 kg or 1.5 m travels safest strapped to a pallet, with the rod end protected. Long cylinders need the rod retracted and secured.
4
Send it to the workshop address
ul. Stalowa 1-13, hala 17, 55-330 Błonie, Poland. Put your company name and a contact number on the paperwork so we can match the pallet to the enquiry.
We can quote and invoice in EUR. If you are a VAT-registered business in another EU country, tell us your VAT number when you ask for the quote. Return freight is arranged the same way the part came in — we will confirm the cost together with the quotation, before any work starts.